AERO-LITE Threaded Fastener

Pin Fastening Systems : AERO-LITE Threaded Fasteners

AERO-LITE Threaded Fasteners

Lightweight Threaded Fasteners
Typical of AL10/108, AL11/109, AL12, AL13, Al315, AL331,  AL755 & AL756 

The AERO-LITE®design features a tapered lead thread which closely matches mating collar allowing 1/3 through 1/2 pitch under grip performance due to enhanced full form thread runout.
The AERO-LITE®fastener is a lightweight Titanium alloy fastener at 95 KSI shear strength. AERO-LITE™ fasteners are also available in other materials on request.
The AERO-LITE®fastener is a threaded pin with a close tolerance design intended for applications where aerodynamic and precision fastening is required. The AERO-LITE™ fastener is superior to HI-LITE® and VERI-LITE® fasteners in its ability to perform throughout the grip range and within the requirements established by Boeing that requires the use of a sharp edge ring gauge for functional inspection.
The AERO-LITE®fastener is available for use with Bristol, Hi-Shear and Kaynar lightweight collars/nuts.
Huck has introduced the AL331, a close tolerance flush head version of the AL11 fastener that was developed jointly with the Boeing Company For use on the 737-700 wing to improve cosmetics and aerodynamics. Boeing approved the AL331 AERO-LITE®as part No. BACB30YP and is used interchangeably with BACB30XT which is the close tolerance head LGPL18SC Lockbolt on all Boeing programs.
Huck Aerospace Carson division has been approved by Boeing and Grumman/Northrop as source delegate on the AERO-LITE®and LGP® Lockbolt fasteners for Boeing aircraft production.

AERO-LITE®Key Performance & Advantages
  • Improved under minimum grip performance with mating collars and nuts.
  • Thread runout and incomplete threads completely within 1X thread pitch.
  • Full form thread adjacent to thread runout and pin shoulder.
  • Maximum shank in bearing (Reduced shank underfill length) in maximum grip.
  • Maximum cross sectional area at point of highest stress. (Thread runout area)
  • Statistical process control(SPC) of all key characteristics.Lot to lot consistency of fasteners.
AL331 and LGP Lockbolts have the same dome heads that are interchangeable in size and appearance. This allows manufacturing to intermix fastening systems and maintain general surface appearance.
The AERO-LITE®is ideally suited for applications particularly where there is no access for LGP Lockbolts.
The close tolerance head geometry allows for a smaller edge with a slightly larger diameter, which results in a minimum eyebrow when installed.
As part of the close tolerance head configuration Huck has in coordination with the Boeing Company to developed a new precision method of head height gauging. Accompanied with the statistical process control (SPC) guarantees precision close tolerance heads.
The slight dome on the head of the fastener improves aerodynamic drag and therefore saves in operational costs.
The AERO-LITE®fastener with it’s unique thread lead in design can be used with either Hi-Shear, Kaynar or Bristol aluminum light weight collars/nuts to the full 1/16th inch grip range.
The fastener installation performance requirements are detailed in Huck Product Specification C380.
The AERO-LITE® fastener is a lightweight fastener that performance wise can replace the HI-LOK®/HI-LITE® in diameter 5/32 through 7/16 inch.
AERO-LITE®is a trademark of Huck International Inc.

HI-LOK® and HI-LITEe® are registered trademark products of Hi-Shear Corporation.

VERI-LITE® is a registered trademark of Fairchild Fasteners.

Viewing documents in PDF format requires Adobe Acrobat Reader, which is available as a free download from the Adobe Web site.

Related Documents
Related Documents

The Huck AERO-LITE Threaded Fastener [191KB]

How to Order [13KB]

Related Information

Engineering Standards

Technical Information

Contact Information
Americas & Asia/Pacific
Customer Support


Technical Support

Europe Customer / Technical Support
+49 8251 8757-0
+49 8251 1652