87360 - Hub Piloted 22.5" x 7.50" on 285.75mm bolt circle
Clean Buff Both Sides, except where applicable³
22.5 x 7.50
Hub Bore Diameter
Bolt Hole Diameter
Max. Wheel Load1
Max. Inflation – cold
Accessories & Mounting Hardware
Front Outer Cap Nuts
Rear Inner Cap Nuts Al/Al
Rear Inner Cap Nuts Al/Stl
Rear Outer Cap Nuts
Hub Cover System
Hub covers: Front - 076018 or 076085 Rear - 077018 or 077085 One-Piece hub cover system: Front - 086100S, Rear - 087100S
Do not exceed maximum wheel load. Customer must compare OEM vehicle load rating to maximum wheel load rating. Do not overinflate. Refer to tire manufacturer's recommendation for proper tire pressure. Before mounting the tire, perform a wheel fitment check to ensure proper clearance from any obstructions.
1. Capacity ratings as dual or single in highway service – bias-ply or radial. 2. Outset (positive)/inset (negative) – The distance from the rim centerline to the mounting face of the wheel. Inset (negative) places the rim centerline inboard of the wheel mounting face and outset (positive) places the rim centerline outboard of the wheel mounting face (½ dual spacing = offset). 3. Clean Buff Inside Only finish for products 822627, 840627, 841477, 841677. Clean Buff Outside Only finish for products 824627, 834627, 893637.