89652 - Hub Piloted 22.5" x 9.00" on 335mm bolt circle : Hub piloted mounting system

Hub piloted mounting system

  • Cap nuts clamp the wheel (see red arrows below)
  • Hub centers the wheel
  • Same stud and cap nut used for entire vehicle (no inner cap nuts)



Single wheel, hub piloted
View single wheel detailed cross section
View wide base wheel (super single) detailed cross section



Dual wheel, hub piloted
View dual wheel detailed cross section

Finish Part Number
Dura-Bright® Wheels
Brushed Both Sides
896520DB
Dura-Flange Wear Protection®
Brushed Both Sides
896520DF
Dura-Bright® Wheels with XBR™ Technology
Polished Both Sides
896523DB
Dura-Flange Wear Protection®
Polished Both Sides
896523DF
Brushed Both Sides896520
Polished Both Sides896523


Specifications Measurement
Size22.5 x 9.00
Bolt Circle13.189
Hub Bore Diameter11.075
Bolt Hole Diameter1.053
Max. Wheel Load19090
Wheel Weight51
Outset26.93
Inset6.08
Max. Inflation – cold142
Valve StemMS70-7


Accessories & Mounting Hardware Part Number
Front Outer Cap Nuts -
Rear Inner Cap Nuts Al/Al -
Rear Inner Cap Nuts Al/Stl -
Rear Outer Cap Nuts -
Hub Cover System -
Hug-A-Lug®1811


Do not exceed maximum wheel load. Customer must compare OEM vehicle load rating to maximum wheel load rating. Do not overinflate. Refer to tire manufacturer's recommendation for proper tire pressure. Before mounting the tire, perform a wheel fitment check to ensure proper clearance from any obstructions.

1. Capacity ratings as dual or single in highway service – bias-ply or radial.
2. Outset (positive)/inset (negative) – The distance from the rim centerline to the mounting face of the wheel. Inset (negative) places the rim centerline inboard of the wheel mounting face and outset (positive) places the rim centerline outboard of the wheel mounting face (½ dual spacing = offset).
3. Clean Buff Inside Only finish for products 822627, 843627. Clean Buff Outside Only finish for products 824627, 834627, 893657.

Contact Information
Find out more information about this product
Email