Ti-Matic® Blind Bolts : Technical Information : Identification and Inspection Criteria

Identification and Inspection Criteria

Ti-Matic® Blind Bolts
Ti-Matic® Blind Bolts carry the following identification head markings.
 
The special "H" as manufacturer's identification symbol.
 
Material code letters:
 
"MV" = All Titanium components /  "EV" = CRES sleeve with Titanium pin  
Grip identification number:
(1/16" increments)
Example: -04 grip range is .219" to .282"


Illustration of head markings on UB100-MV06-04

Grip Thickness Measurements using Huck Grip Gage


Inspection of installed Ti-Matic® Blind Bolts
The position of the spindle break and the lock collar position provide important information about the quality of the installation. Spindle and collar flushness are shown in the table below.

Nominal
Diameter


TI-MATIC® Blind Bolts

Pin Position
"A"


Collar Position
"B"


-04
±.010
±.010
-05
±.010
+.010/-.017
-06
±.010
+.010/-.022
-08
±.015
+.015/-.029
-10
+.020/-.015
+.020/-.037








Viewing documents in PDF format requires Adobe Acrobat Reader, which is available as a free download from the Adobe Web site.




Related Documents
How to Order [31KB]




Process Manual [1KB]




Sales Brochure [656KB]


Related Information


Engineering Standards


Mechanical Performance

Contact Information
Americas & Asia/Pacific
Customer Support
Alcoa Fastening Systems & Rings Aerospace
800.992.4444
805-527-0900

Email

Technical Support
Alcoa Fastening Systems & Rings Aerospace
310.784.6409
Email

Europe Customer / Technical Support
Alcoa Fastening Systems & Rings Aerospace
+49 8251 8757-0
+49 8251 1652

Email