Head markings

HUCK-CLINCH® Blind Rivets : Technical Information : Identification and Installation Inspection

Identification and Installation Inspection

HUCK-CLINCH® blind rivets carry the following identification head markings:
The special "H" as manufacturers identification symbol
Material code symbol
Aluminum rivets with alloy steel spindle has no markings.
Aluminum rivets with CRES spindle has a "+" symbol
Grip identification number.
grip range is nominal +0 / -.063"
Example: -04 grip range is .250" to .187"

Grip Thickness Measurements using Huck Grip Gage

Installation Inspection
The position of the spindle break and lock position provides important information about the quality of the installation Spindle limits are shown in table below.


"A" Dimension Pin Above Rivet Head

"B" Dimension Pin Below Rivet Head

1/8  -4
- .015"
5/32 -5
- .020"
3/16 -6
- .020"
Lock Ring is not visible, it is an internal, "Solid Circle Lock"
No lock ring is visible at the rivet head. Spindle flushness indicates proper lock formation.

Viewing documents in PDF format requires Adobe Acrobat Reader, which is available as a free download from the Adobe Web site.

Related Documents
How to Order [29KB]

Specifications [1220KB]

Related Information

Mechanical Properties


Part Numbers

Removal Data

Engineering Standards

Contact Information
Americas & Asia/Pacific
Customer Support
Alcoa Fastening Systems & Rings Aerospace


Technical Support
Alcoa Fastening Systems & Rings Aerospace

Europe Customer / Technical Support
Alcoa Fastening Systems & Rings Aerospace
+49 8251 8757-0
+49 8251 1652