Blind Rivets : HUCK-CLINCH® Blind Rivets : Removal Data

Removal Data

Should it be necessary to remove an installed HUCK-CLINCH® rivet, the following procedure is recommended.

1. It is recommended that a small center drill be use to provide a guide for a larger drill.
2. Using a high strength drill of a diameter equal in size to the rivet spindle drill to depth of lock.
3. Drive out the rivet spindle using steel drift pin of proper size.
4. Drill nearly through the head of the rivet using a drill the same size as the rivet shank.
5. Break off rivet head using drift pin as a pry.
6. Drive out the remaining sleeve with a drift pin having the same size as the rivet shank.

Viewing documents in PDF format requires Adobe Acrobat Reader, which is available as a free download from the Adobe Web site.

Related Documents
How to Order [29KB]

Specifications [1220KB]

Related Information

Mechanical Properties


Part Numbers

Engineering Standards

Technical Information

Contact Information
Americas & Asia/Pacific
Customer Support


Technical Support

Europe Customer / Technical Support
+49 8251 8757-0
+49 8251 1652