Main Feature
03 Broach Non Impact\001 broach non-impact

If you're having trouble viewing the video below, click here for an alternate version.
RFOPB5000HDB Broach Tool – Non-Impact

APPLICATION: This broach tool is designed to produce serrations in the counterbore wall of ports prepared per PS10035. The tool will broach aluminum, magnesium, and many steels with hardness of 40 HRC or less. Successful broaching of harder or tougher material may be accomplished, but tool cutter wear is to be expected.

Select the port serration tool for the fitting. This is a hand held serration tool, also known as a broach, Non-Impact type. The tool has a threaded mandrel that screws into the threaded port.

The cutter will now be in position for broaching.

The method of broaching is to screw the large diameter nut, which presses the cutter in to the port. The broach is complete when the tool touches the port surface. Remove tool.
Video Categories
Fluid Fitting port machining and Fitting installation procedure

Other Videos
AFSR Fasteners Division Video
Learn about Alcoa Fastening Systems & Rings - a leading global designer, manufacturer, and distributor of innovative fastening solutions for aerospace and industrial applications.
Watch the Video
FC43® Structural Panel Fastener
The FC43® is an advanced structural panel fastener from Alcoa Fastening Systems & Rings. This video explains the features, and shows how to install the fasteners.
Watch the Video


Featured Videos


AFSR Fasteners Division Video
AFSR Fasteners Division Video
Watch the Video

FC43® Structural Panel Fastener
FC43® Structural Panel Fastener
Watch the Video