Blind Bolt Removal Procedure
Huck Blind Bolts can easily be removed without damage to the structure if the following procedure is followed and if the removal kits specified are used.
Place drill bushing from removal kit so that it rests squarely on lock collar. Using a drill from the proper removal kit, drill at a 1250 RPM maximum to lock collar depth.
Position pin punches from proper removal kit in drilled area and drive out remaining pin. Remove any lock ring remaining in the sleeve head with the pin punch.
Using adjustable micro limit tool in removal kit, adjust cutter to depth of fastener head. Micro limit tool is fitted with an anti-rotation cap to hold sleeve head during cutting operation.
Using the correct size sleeve punch from the kit, push out the remaining sleeve. Use the same punch to lift out the remaining headpiece.
Removal Kit Drill and punch sizes