 |
|
|
|
|
Blind Rivets :
HUCK-CLINCH® Blind Rivets :
Technical Information
Technical Information
Performance Reports
Qualification Reports
84-OHC-118 5/32 & 3/16 Oversize HUCK-CLINCH® qualification to MIL-R-7885. (OHC was later revised to HC3242 & HC3243 or M7885/6 & M7885/7)
86-OHC-145 1/8 oversize HUCK-CLINCH® qualification to MIL-R-7885. (OHC was later revised to HC3242 & HC 3243 or M7885/6 & M7885/7)
91-HC-01 1/8, 5/32 & 3/16 Nominal HUCK-CLINCH® qualification to MIL-R-7885. (HC was later revised to HC3212 & HC3213 or M7885/2 & M7885/3)
TUC-93-03 1/8, 5/32 & 3/16 Nominal HUCK-CLINCH® with CRES Spindle.(HC6222 & HC6223 or M7885/11 & M7885/12
TUC-93-04 1/8, 5/32 & 3/16 Oversize HUCK-CLINCH® with CRES Spindle. (HC6252 & HC6253 or M7885/14 & M7885/15) with CRES Spindle. (HC6252 & HC6253 or M7885/14 & M7885/15)
Spindle Retention
TUC-91-09 Tests in oversize holes.
Vibration Tests
TUC-93-10 Blind rivet comparison tests.
Tensile and tensile preload
TUC-94-02 Blind rivet comparison tests.
Corrosion Tests
TUC 92-06 Test in salt fog.
TUC 93-08 Rivet comparison test in salt fog.
Fuel Seal Tests
TCT 93-6 Test in dynamic pressure vessel.
Fatigue tests
TCT-92-21 Blind rivet comparison tests.
TCT-92-22 Blind rivet comparison tests.
TCT-93-8 Unisink head tests.
Any of these reports or other technical data refereed to are available through AFS engineering.
Installation Sequence
 more
Identification and Installation Inspection
more
Viewing documents in PDF format requires Adobe Acrobat Reader, which is available as a free download from the Adobe Web site.
|
|
|
|
|
