| Step One |
Place drill bushing from removal kit so that it rests squarely on lock collar. Using a drill from the proper removal kit drill at a 1250 RPM maximum to lock collar depth.
| Step two |
Position pin punch from proper removal kit in drilled area and drive out remaining pin. Remove any lock ring remaining in the sleeve head with the pin punch.
| Step Three |
Using adjustable micro limit tool in removal kit adjust cutter to depth of fastener head. Micro-limit tool if fitted with an anti-rotation cap to hold sleeve head during cutting operation.
| Step Four |
Using the correct size sleeve punch from the kit push out the remaining sleeve. Use the same punch to lift out the remaining headpiece.