Study finds Alcoa Forged Aluminum Wheels dramatically cut the carbon footprint of commercial vehicles


Savings of switching one truck from steel wheels to Alcoa Forged Aluminum Wheels equals the average annual carbon footprint of an American household.
Download the report

Aluminum will be greenhouse gas neutral by 2030


In the critical transportation industry, our research in lifecycle modeling has shown that by 2030 the emissions of the entire aluminum industry can be offset by the potential emission savings from the transport sector's increased use of aluminum.
Download the report
Commercial Transportation : Wheels : Heavy Duty Truck : 98567 - Hub Piloted 24.5" x 8.25" on 285.75mm bolt circle

98567 - Hub Piloted 24.5" x 8.25" on 285.75mm bolt circle

Finish Part Number
Dura-Flange Wear Protection®
Clean Buff Both Sides, except where applicable³
985677DF
Polished Outside Only985671
Polished Inside Only985672
Clean Buff Both Sides, except where applicable³985677


Specifications Measurement
Size24.5 x 8.25
Bolt Circle11.25
Hub Bore Diameter8.669
Bolt Hole Diameter1.053
Max. Wheel Load18300
Wheel Weight64
Outset26.6
Inset5.63
Max. Inflation – cold130
Valve StemTR555D


Accessories & Mounting Hardware Part Number
Front Outer Cap Nuts -
Rear Inner Cap Nuts Al/Al -
Rear Inner Cap Nuts Al/Stl -
Rear Outer Cap Nuts -
Hub Cover SystemHub covers: Front - 076188 or 076185 Rear - 077188 or 077185 One-Piece hub cover system: Front - 086100S, Rear - 087100S
Hug-A-Lug®1811


Do not exceed maximum wheel load. Customer must compare OEM vehicle load rating to maximum wheel load rating. Do not overinflate. Refer to tire manufacturer's recommendation for proper tire pressure. Before mounting the tire, perform a wheel fitment check to ensure proper clearance from any obstructions.

1. Capacity ratings as dual or single in highway service – bias-ply or radial.
2. Outset (positive)/inset (negative) – The distance from the rim centerline to the mounting face of the wheel. Inset (negative) places the rim centerline inboard of the wheel mounting face and outset (positive) places the rim centerline outboard of the wheel mounting face (½ dual spacing = offset).
3. Clean Buff Inside Only finish for products 822627, 843627. Clean Buff Outside Only finish for products 824627, 834627, 893657.





Contact Information
Alcoa Wheel Products
800.242.9898
Email